8
5.4 SETTING THE TEMPERATURE UNITS
With the refrigerator switched off, press and hold the SET +
▲
+
▼
buttons at the same time for a
few seconds to access the parameter settings.
Press the
▲
+
▼
buttons to scroll to the function (F - C), press the SET button to enter the
parameter and press the
▲
+
▼
buttons to change the setting.
Without having to press any other button to confirm, the display will automatically save the setting
and exit programming mode.
5.5 SETTING THE OFF-SET VALUE
This is the information needed to align the temperature shown on the display with the actual
temperature inside the refrigerated compartment. Each off-set can be adjusted within a range
from -10°C to +10°C. After running the refrigeration system for a few hours, place a digital
thermometer (not supplied) inside the compartment, in a location where a more accurate
temperature is required, and check that the temperature shown on the display coincides with the
temperature shown on the digital thermometer. If the temperature is not the same, the off-sets
must be adjusted in relation to the temperature you want the inside of the compartment to reach.
The following table shows the factory off-set setting for each temperature range and the
adjustment range for changing these settings.
With the refrigerator switched off, press and hold the SET +
▲
+
▼
buttons at the same time for a
few seconds to access the OFF-SET value adjustment.
Press the
▲
+
▼
buttons number of times to scroll through the three functions (F1-F2-F3) in
succession. Once you have selected the function you wish to change, press the SET button to
access the selected OFF-SET value and press the
▲
+
▼
buttons to change the factory setting,
while remaining within the +10°C ~ -10°C range. Without having to press any other button to
confirm, the display will automatically save the setting and exit programming mode.
OFF-SET
TEMPERATURE
RANGE
FACTORY SETTING
ADJUSTMENT RANGE
F1
T > -6°C
-2°C
+10°C ~-10°C
F2
-12°C < T< -6°C
-4°C
+10°C ~ -10°C
F3
T<-13°C
-4°C
+10°C ~ -10°C
Table 3:
Offset Settings
