2
INSTALLATION
SPECIFICATIONS
*Recommended Power Supply PSK06 or PSK06F
Model
MDA20HT
Frequency
174-860 MHz
Gain
19 dB
Flatness
± 0.5 dB
Noise Figure
<1.6 dB
Output Figure
118 dB @ -60 dBIMR
Din 45004 B
Return Loss
>10 dB
Supply Voltage
12-24 V
DC ONLY*
Filters
174 MHz HP
Inputs
1
The head of the amplifier may be mounted outside
on the pole under the antenna or in the roof. The
amplifier requires F type connectors.
The power supply unit is placed at a television
outlet, or at a remote location, a low voltage then
runs up the cable to power the head remotely, via
the output. There are no controls inside the diecast
housing, however there is an LED that when on,
indicates power is present.
Bare back cable with a cable
stripper or Stanley knife.
Slide on F connector and crimp
or use a twist-on connector.
PSK06F
INPUT
14
VO
LT
DC
*Note: Depending on the wall plate installed and
model power supply used, you may need to use
adaptors.