Quick Start Guide:
DCF-1
•
3
3.2.3 Set Country
Main Menu
Set Country
Set Country
AUS
No
Yes
◄
In this section, select the country you are currently at, and the DCF-1 will change the frequency plan accordingly. (Country options: Europe,
Thailand, New Zealand, Australia, Mexico and Brazil.)
3.2.4 Output
Main Menu
Output
Output
Level 93 dBμv
Output
Slope 0 dB
1. Output power level can be adjusted from 93 dBμV ~ 113 dBμV
2. Slope rate can be changed from 0 ~ -9 dB
The Output Level is for the total channel power, the more channels are added to the DCF-1, the lesser output power you should give to each
channel.
3.2.5 FW Version
Main Menu
FW Version
HW: 0.8 MCU: 2.3.2
SW: 2.3.1 (FFFF)
Above display shows the hardware, MCU and software version of the device.
3.2.6 Reset default
Main Menu
Reset default
No
◄
Yes
No
Yes
◄
Rebooting System
Please Wait ...
To reset the DCF-1 to default setting, please follow above steps. By doing so the DCF-1 will erase all of previous programming from the device
permanently. Please note all the information within the DCF-1 will be erased with command, but the user can reload the configuration from
“dcf1_configuration.bin” file within the Download folder if setting has been saved previously.
3.2.7 Lock
Set Pin Code
Lock
Set Pin Code
Set Pin Code
0000
Default pin code: 0000
To avoid unauthorized people changing the settings or unintended maneuver, DCF-1 can be locked with security code.
1. Use Left/Right buttons to move between numbers.
2. Use Up/Down buttons to change the code numbers.
3. When the code has been set up, use the Right button to save changes and leave this level.
4. When the cursor is on the left side, use the Left button to leave this level without any change.
Set Pin Code
Lock
Lock
Enter Password
****
This function is made to protect the settings, after enable this function you will have to enter password every time when you try to operate the
DCF-1.
No Lock
Lock
No Lock
The user may leave the DCF-1 without any protection by choosing above option.
3.2.8 LCD Timeout
Main Menu
LCD Timeout
LCD Timeout
120s
◄
Home screen will automatically turn off in 30 seconds if nothing being ordered, use any key on the key pad to awake the DCF-1.
You can change the timeout setting from 30/60/90/120s.
