7
Mode button
Press this button can your required operation mode in turn. Corresponding
indicator will be on.
Under this mode, air conditioner operates under cooling mode. Cooling
indicator will be on. Press “Fan Speed” button can adjust the fan speed.
Under this mode, the unit will operate automatically according to
ex-factory setting. In this case, set temperature cannot be adjusted.
Under this mode, air conditioner operates under SE mode. SE
indicator will be on. Press “Fan Speed” button can adjust the fan speed.
Under this mode, air conditioner will not cool or heat, only blow
wind. Fan indicator will be on. Press “Fan Speed” button can adjust the fan
speed. (No auto fan speed under fan mode)
Under this mode, the unit runs in low fan speed for dehumidification and
the corresponding indicator is on; under dry mode, the fan speed cannot be
adjusted.
Dry
Cool
Auto
Fan
Only
Energy
Saver
Press this button can turn on or turn of
NOTE:Press this button to turn on air conditioner, the unit will operate in Energy
Save mode; if the unit is energized after power failure, the unit will still operate
according to the status before power failure.
f air conditioner.
Press this button can select your required fan speed in turn. Corresponding
speed indicator will be on.
High
Auto
Low
Med
Can be set under off state of unit. If timer ON reaches, the system
will run under Energy Save mode. The setting range is 0.5~24hr.
Can be set under on state of unit. If timer OFF reaches, the unit will
turn off. The timer can be set in 0.5 hour increment below 10 hours and in 1 hour
increment for 10 hours or above.
