Place 1x
part (C)
on to flat surface and
attach the already assembled section
using
2x part (I)
as shown above.
Place part
(D)
as shown above and se-
cure with
4x part (II)
.
2x (II)
at one end
and
2x (II)
at the other.
Secure the pre assembled unit into
place on
part (E)
using
8x (I)
.
2x (I)
for
each leg panel.
Turn over the assemble unit and ensure
that all the fittings are secure.
Place your assemble unit into your chosen location. Attached the seat cushions. Assemble
the parasol by screwing the pole into the top parasol unit. Insert the parasol through the
hole in the top of the table and then enjoy the use of your new Kingfisher product.
Repeat
step 4
for the other side as
shown above.
Place part (E) on a flat surface ready for
the next stage.
4
7
7
7
5
8
6
9
Secure the fittings and turn the
assembled unit upright as shown above.
Turn the pre assemmbled unit upside
down and place on to part (E).
Summary of Contents for Picnic Bench
Page 1: ...Instruction Manual ...
