15
SETTING THE TEMPERATURE OFFSET
This setting compensates for any difference (offset) between the tempera
-
ture displayed by the unit and ambient temperature measured in the room.
This difference varies from one room to another as it depends on the insu
-
lation, room layout and location of the appliance.
This difference must be closed when the ambient temperature is stabilised
after more than 2 hours of heating in Comfort or Eco mode.
This setting changes neither the stability nor the accuracy of the tempera
-
ture regulation
.
- Press
MENU
to display
Πod
, then press
+
to
access the
OFS
menu.
- Press
OK-boost
to enter this menu.
- Press
+
or
-
to set the offset between 8°C and -8°C
- Press
OK-boost
to validate the offset.
- Press
MENU
to exit the menu.
For example, if the appliance is set at 20°C and if the ambient thermometer
displays 18°C, the offset must be
-2°
C.
For example, if the appliance is set at 20°C and if the ambient thermometer
displays 22°C, the offset must be
2°
C.
DEROGATION (Prolonged absence)
.
This function maintains frost protection mode at
7.5°C during a prolonged absence then returns to
the initial settings.
- Press
MENU
to display
Πod
, then press
+
to
access the
dEr
menu.
- Press
OK-boost
to enter this menu.
- Press
+
or
-
to select the number of days of absence from 1 to 99 days (for
example, 5 days =
05.d
).
The current day must be counted as an absence day.
- Press
OK-boost
to activate the absence setting; the number of remaining
days is displayed alternately with the setpoint temperature.
The initial mode (Comfort, Eco or Programme) is re-established at midnight
on the last day of absence.
- Press
MENU
to cancel the absence function.
For example, if the absence is programmed on Monday for 3 days, the ap
-
pliance will remain in frost protection mode until Wednesday at midnight.
Quick start
