30
Care and maintenance
TTB2200PRW
by TITAN
EN
In
more
detail...
After use
> Release the trigger (8b) (Fig. 23).
> Turn the on/off switch to “
0
” position.
> Turn off the water tap.
> Squeeze the trigger to release the pressure still present in the product.
> Lock the trigger.
> Separate the water hose from the water supply and then from the water inlet
hose adaptor (19).
> Wind the pressure hose (16) onto the hose reel (21). Ensure that the hose is
not bent or twisted but winded up evenly.
> Dismantle the accessories in the reverse sequence of the assembly
instructions if you are not going to use this product for a long period of time.
> Check, clean and store the product as described below.
WARNING!
Only separate the high-pressure hose from the spray gun
and the water hose from the product when no more pressure exists in
the system! Also ensure that the product is turned off and separated
from power supply!
8b
Fig. 23
0
Operation
95817_IM_TTB2200PRW_20200702.indd 30
2020/9/21 下午2:06
