KING KD1500, Owner'S Manual

Page: 13 / 36

Page 11
3. Press
SCAN
repeatedly to scroll thru the available service provider options.
4. When the correct lights turn on to show your desired satellite configuration, simultaneously
press and hold POWER and SCAN for five seconds.
All lights will turn off except for the
COAX CONNECTION
light.
5. Locate your service below and follow the instructions:
DIRECTV subscribers:
DIRECTV SD
If you have a newer receiver or current software, choose the following dish
configuration settings (do this through the receiver’s satellite set-up menu screens):
Switch Type: 02:Multiswitch Dish Type: 01: 18” Round
(If you have an older receiver, choose: round dish-1 satellite.)
DIRECTV SD with Locals
If you have a newer receiver or current software, choose the following dish
configuration settings (do this through the receiver’s satellite set-up menu screens):
Switch Type: 02:Multiswitch Dish Type: 02: 3-LNB (18 x 20”)
(If you have an older receiver, choose: oval dish-2 satellites.)
After setting your dish for either service as described above . . . . . . . . . . . . . . go to page 16.
DISH subscribers with the following receivers:
ViP211z • ViP211k • ViP211 • 411
and who chose TAILGATER MODE on the previous page . . . . . . . . . . . . . . . go to page 20.
All other DISH and Bell TV subscribers:
After you have successfully configured your antenna, you must
configure your receiver for mobile use by running a check switch test . . . . . . go to page 12.
NOTE: The KING Rover will not work with SWM only receivers. Your local channels may not be available when
traveling outside your home area.
NOTE:
Your local channels may not be available when traveling outside your home area.
NOTE: Dual tuner receivers or receivers with built-in recorders are not recommended and will not have full functionality
when used with the KING Rover antenna. Your local channels may not be available when traveling outside
your home area.