Control panel diagram 5 function.
USING OF HEATER
ENVIRONMENTAL WARNING: Packing material of the device after installation,
please pay due attention to safety and environmental protection by showing you
trashed. Put the waste packaging at related the recycling bin at according to the
specifications for the re-use of waste packaging (foil, cardboard, Styrofoam, nylon).
Dispose of any electrical equipment make it unusable by cutting the cord.
Plug your device’s plug into a suitable socket. Adjust the termostat.
Bring the on/off switch to the running position.
Thermostat operation:One heating element runs independently of the thermostat
during product operation as precaution. If you find the room tempereture to be low,
increase the thermostat setting.
To finish the operating of your device ,bring the thermostat to ‘min’ position and
on-off buttons to ‘off’ position, and plug the device.
Attention! There is a safety system inside your device. In case of any tipping over
the safety system shall start and cut off electricity.
HEATING FUNCTIONS
There is available 5 heating function on the control panel. It is possible to adjust
requried temprature for every heating function.
1 - Heating function :working heating element 1 and 5.
2 - Heating function :working heating element 1 and 2.
3 - Heating function : working heating elemnt 1, 3, 4
4 - Heating function : working heating element 1, 2, 3, 4
5 - Heating function : working heating element 1, 2, 3, 4, 5.
TOP HEATING ELEMENT
4 TH HEATING ELEMENT
3 TH HEATING ELEMENT
2 TH HEATING ELEMENT
1 TH HEATING ELEMENT
OPERATE 1 TH AND TOP HEATİNG ELEMENT
OPERATE 1 TH AND 2 TH HEATİNG ELEMENT
OPERATE 1TH ,3TH AND 4TH HEATİNG ELEMENT
OPERATE 1TH ,2TH, 3TH AND 4TH HEATİNG ELEMENT
OPERATE ALL HEATİNG ELEMENTS
CLOSED POSİTİON
NOTE: THE FUNCTIONOF FAN ( ) IS ACTIVE AT ALL LEVELS
