KING Flex VQ2100, Owner'S Manual

Page: 17 / 56

D
IS
H
5
press and hold POWER and SCAN
SCAN PROGRESS lights will turn off and the
COAX CONNECTION
ALARM CONFIGURATION
Single Beep (beep...beep...beep)............................ OFF .
Double Beep (beep beep...beep beep) ................... ON .
5. Press and release SCAN to toggle between the on and off conditions.
Beep pattern will change to indicate new condition.
POWER and SCAN for 5 seconds to exit
COAX CONNECTION light will turn solid and
SCAN PROGRESS lights will stay off.
IF YOU CHOSE TAILGATER MODE, GO TO PAGE 14.
IF NOT, GO TO RECEIVER CONFIGURATION ON NEXT PAGE.
Notes on Alarm Feature
When alarm is enabled: If the coax cable is disconnected from the antenna unit or the controller while the system is
POWER until the controller turns off.
This unit is shipped from the factory with the alarm feature in the ON condition.