background image

Installation and servicing

Installation must be carried out by persons with the 
necessary knowledge and experience of water and 
drainage connections in accordance with the instruc-
tions in these directions for use and installation.

The power cord must be plugged into an earthed socket.
Permanent installation must only be carried out by an 
authorized electrician.

Water connection shall be made via an easily accessible
stopcock.

Before performing any checks or repairs on the machine
it must be isolated from the electrical supply. To do this
the power plug must be removed from the wall socket.

Make sure that the power cord is not nipped or otherwise
damaged and that the hoses do not get crushed or 
kinked when moving the dishwasher in connection 
with installation or cleaning etc.

If the power cord is damaged, it must be replaced 
by a special cord or assembly available from the 
manufacturer or its service agent.

Our approved build-in kit must be used if the dishwasher
is to be built into the kitchen furnishings.

Servicing and possible repairs must be carried out by 
a service company authorized by the supplier. Use only
spare parts supplied by these. Never try to repair the 
dishwasher yourself.

Child Safety

The dishwasher should be used by adults only. Do not
let children play with the controls or other parts of it.

Remember that the plastic bags included in the 
packaging can be fatal playthings for small children.

Keep all detergents in safe place out of children´s 
reach.

Prevent children from sitting, swinging or standing 
on the open door.

During Use

This dishwasher is designed solely for washing house-
hold utensils suitable for machine washing. Using it for
other purposes could lead to physical injury or damage
to property and invalidate the guarantee.

Avoid opening the door while the dishwasher is running,
as hot steam may escape.

Only use detergent specifically designed for use in 
dishwashers.

Do not place sharp knives with their points upwards. 
It is much safer to lay them horizontally in the basket.

If you take any dishes out of the machine before the 
end of the dishwashing cycle, it is extremely important 
to rinse them thoroughly under running water to remove
any remaining detergent.

After using the machine, turn off its water supply and 
disconnect it from the power supply. When removing 
the electrical plug, grip the plug, not the lead.

In the event of flooding or leakage, shut off the water 
supply immediately by closing the stopcock and dis-
connect the power supply by unplugging the power cord
or removing the fuse.

Identification of materials

All materials used in packaging this appliance are 
environmentally-friendly. The various plastics used
are identified and can be recycled:

PE stands for polyethylene, which is used for the 
bag around the appliance and the bag in which these 
instructions were supplied.

PS stands for polystyrene (moulded), which is used 
for the sections of packaging needed to cushion the 
appliance.

The cardboard components of the packaging are made
from recyclable paper and should be taken to a collection
point for recycling.
The appliance contains plastic and rubber components.
These have identifying marks to show what they are
made from, so they can be recycled or disposed of pro-
perly at the end of the appliance's life cycle. 
The materials are identified according to international
standards.

- 3 -

822 90 11-08

Safety information

Before installing and first using the dishwasher, read this instruction booklet carefully, including its
hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all
people using the dishwasher are thoroughly familiar with its operation and safety features.  
Save these instructions and make sure they remain with the dishwasher if it is moved or sold, so
that everyone using it through its life can be properly informed on appliance use and safety.

Summary of Contents for ESF 235













Reviews: