The Mobile Antenna Setup screen should appear. (Make sure your TV is on the correct input that your Tailgater is connected to.
Check input by pressing Source/Input button located on the side, back or front of your TV, or on your TV’s remote.)
When scan is complete:
NEW UNACTIVATED RECEIVERS:
The on-screen instructions will guide you through an initial setup and activation
procedure. Upon completion, you will need to call a DISH mobile antenna specialist at 1-800-963-DISH (3474) to
activate your receiver.
ACTIVATED RECEIVERS:
Watch TV. Enjoy!
Owner’s Manual:
For more information on operation, troubleshooting, roof installation, the warranty and accessory options for your DISH Tailgater,
please refer to the DISH Tailgater Owner’s Manual for your specific receiver at kingconnect.com/product/dish-tailgater:
DISH Tailgater with Wally Receiver
or
DISH Tailgater with ViP Receiver
Wally is a trademark, and DISH and Tailgater are registered trademarks of Dish Network, L.L.C. KING is a registered trademark of Electronic Controlled Systems, Inc. PN 22480 Rev A © 2016 KING
Follow the on-screen instructions to perform a scan.
Turn on your TV.
4
5
If the Mobile Antenna Setup screen does not appear:
Wally receivers:
Unplug the Wally for 10 seconds, and then plug back in.
(It may take several minutes for screen to appear.)
ViP receivers:
Press MENU, 6, 1, 1. When Point Dish screen appears,
highlight “Check Switch” and press Select.
Wally receiver screen shown. Other receiver screens will vary.
