background image

Manufactured by: KING TECHNOLOGY, INC.
530 11th Avenue South, Hopkins, MN 55343 U.S.A.
952-933-6118 

.

 800-222-0169 

.

 FAX 952-933-2206  www.kingtechnology.com

Assembled from components made in the U.S.A. and Israel.

Covered by one or more of the following U.S. Patent Numbers: 4,662,387;

5,076,315; 5,218,983; 6,190,547; 6,210,566; 6,217,892; 6,383,507; 6,544,415;

6,551,609; 6,652,871 and other U.S. and Foreign Patents Pending.

PN #20-48-0162

553090643R2N

POOL FROG

®

 Mineral Hybrid Generator Seven-Year Limited Warranty

This warranty applies to the chlorine generator and their factory-supplied
components (the generator) when purchased from an authorized dealer
and used for residential swimming pools or spas. King Technology, Inc.
warrant the generator to be free from defects in materials and workmanship
in the manufacturing process for a period of seven (7) years from the
purchase date, when properly installed and operated in accordance with
the relevant manuals. For three (3) years after the generator’s original
purchase date, should the generator exhibit a manufacturing defect, King
Technology, Inc. will install comparable replacement parts 

without charge

for parts or labor

. For the subsequent 4 years, if a part with a manufacturing

defect is delivered freight prepaid to King Technology, Inc., a comparable
replacement part will be sent back for a charge of 60% of the latest list price
plus the cost of shipping.

EXCEPTIONS & LIABILITY LIMITATIONS

This warranty is the exclusive warranty for the generator. This warranty is
not transferable. 

KING TECHNOLOGY MAKES NO REPRESENTATION

OR WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, AS TO
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY
OTHER MATTER CONCERNING THE GENERATOR

. Any express warranty

not provided herein, and any remedy for breach of contract but which for
this provision might arise by implication or operation of law is hereby
excluded and disclaimed. YOUR EXCLUSIVE REMEDY IS THE REPAIR
OR REPLACEMENT OF THE UNIT, AND IN NO EVENT SHALL IT EXCEED
THE PURCHASE PRICE OF THE UNIT. IN NO EVENT WILL KING
TECHNOLOGY BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL,
SPECIAL OR PUNITIVE DAMAGES FROM ANY CAUSE.

Owner’s Registration Form

Owner’s Name_______________________________ Signature______________________________

Street Address______________________________________________________________________

City__________________________________________ State____________  Zip________________

Phone #____________________________ E-Mail_________________________________________

Authorized Dealer__________________________ Sales Rep________________________________

City_________________________________________ State__________  Zip___________________

 Model FROG

®

 6425   

 Model FROG

®

 6440     Control Panel Serial #_________________________

(Check one - see label on blue end of cell)

 

(Located on side of the control panel mounted to

 

wall.)

Cycler Serial #________________________ 

(Located on side of cycler above port opening.) 

Date Installed________

Comments________________________________________________________________________

IN ORDER TO ACTIVATE YOUR WARRANTY PLEASE RETURN THIS PORTION TO

:

KING TECHNOLOGY, INC., 530 11th Avenue South, Hopkins, MN 55343
or fax to 952-646-4300 or register online at www.kingtechnology.com

Labor coverage is applicable only for installations within a 50-mile radius
of an authorized dealer. King Technology, Inc., and their suppliers, dealers,
and distributors SHALL NOT BE LIABLE FOR DAMAGE OF ANY SORT
OR NATURE RESULTING FROM ABUSE, MISUSE, NEGLIGENCE,
LIGHTNING, ABNORMAL WEATHER CONDITIONS, OR ACT OF GOD;
OR DAMAGE CAUSED BY IMPROPER OR UNAUTHORIZED
INSTALLATION OR REPAIR. This warranty applies only to components
supplied by the factory and only where such components have been
installed and maintained in compliance with the respective installation and
operation manuals and instructions and applicable ordinances and codes.
In no event shall the liability exceed the purchase price of the product. THE
CONSUMER SHALL BE LIABLE AT STANDARD RATES FOR ANY
SERVICE VISIT WHERE NO MANUFACTURING DEFECT WAS PRESENT
AND FOR ALL SERVICE VISITS REQUESTED AFTER THE THIRD YEAR
FOLLOWING THE ORIGINAL PURCHASE DATE.

PROOF OF PURCHASE

The consumer is responsible for establishing the original purchase date
and the purchaser’s identity for warranty purposes. We recommend that
a bill of sale, canceled check, or some other appropriate payment record
be kept for that purpose. The express warranty above constitutes the sole
and complete warranty and takes precedence over all other warranties,
whether expressed or implied, including a warranty for fitness for a particular
purpose. No sales representative, dealer, distributor, or other person is
authorized to give any warranty on behalf of King Technology, Inc.

Summary of Contents for Mineral Hybrid





















Reviews: