Page 7 of 18 Ver 1.2
T3 --- GSM 3G Senior Telecare
---GSM 3G Elderly Care Alarm System
4. Installation and Setting
b
y PC software:
1) Open the unit's back side cover and insert the SIM card.
2) Connect the unit's power supply,
Cuff for measure blood pressure
,siren(if needed),and USB cable to PC.
3) Switch ON the main unit.
4) On
computer’s desktop, right click
"My Computer" >>> "Property" >>>"Hardware" >>"Device Manager"
.
5) Find "
Ports (COM & LPT)
",check the port number of "
Silicon Labs CP210x USB to UART Bridge
",
for example:COM3. (
Click here
to know
how to find out the COM Port on your computer
)
6) Run this configuration software, select the COM Port number, for example:COM3.click"Open Com Port",
Click " Enter Setup Mode ",default password is 000000. Fill the new password if you had changed before,
then
click “OK”.
7) Click "Read Settings". Configure the parameters as per you need.
8) After finished configuration, Click "Save Settings", process finished.
Log in
Steps:
Select the COM port>>>Open Com Port>>>Sync PC Time >>>Enter Setup Mode>>>Password verify>>>OK.
(Default password:000000)
