A Top Safety and Protection Solution In The Worldwide!
www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page
２０
of 24 Ver 2.0 File No.: S8000020
code area;
4)
Also, you can see the H, N, and L letters besides the 3X8 PIN and 3X4
PIN connectors, like below;
5)
Connect L and N is means 0, and connect H and N is means 1, connect
neither L and N nor H and N is means 2 ;
6)
According to below table, select the Zone and set the 3X4 PIN Wireless
data bits code area according to selected zone.
7)
Set A0-A7 as the same of all wireless sensors,then install the cover
carefully. If you set A0~A7 different, then you need to learn the new
wireless sensors to the control unit again. If the same then needn’t to
learn it again.
8)
Turn off the sensors’ power before setting .
9)
Then run the PC Programmer Tool, see the Page 13, 9).
10)
Trigger the wireless sensor and test the setting result. If the wireless
sensors do not work, please check the jumpers again.
11)
You can set many sensors in the same zone by set the same codes of
the jumpers.
Appendix: Zone Setting Table
Serial No.
Deflaut Zone Name
Wireless data bits
D0
D1 D2 D3
Zone 1
Inner Door Contact Sensor 1
1
0
1
0
