K I N G - M E T E R s p e c i f i c a t i o n o f W H 5 2 7 - L C D d i s p l a y
v 1 . 0
7/20
6. Function Setting of Interface
6.1 Prepare for Power On
Ensure the connector joint fix before power on display, and power
on the battery of e-bike.
6.2
Power on/off
Press
Button for 2-3 seconds then the display will work
normally, and the controller will power on at the same time.
With display on
，
press
>2s
，
the display will shut down
，
the
display will leave off battery
，
the leakage current of display on is less
than 1μA.
6.3 Battery Indication
When the battery is in high voltage the 5 level all light on
，
when
the battery is in low voltage, battery frame will flash to notice that the
battery needs to be recharged immediately.
Low Voltage Flash
