King-Meter K5274 User Manual Download Page 9 | Manualshive

Page: 9 / 18

King-Meter K5274 User Manual Download Page 9

KING-METER TECHNOLOGY CO., LTD

No.15, Chenchang Road, Beichen Dist.Tianjin,300134, CN

Fax

：

+0086 022 8478 0358 Tel: +0086 022 8478 0378

- 6 -

5.4 Data statistics interface

When the speed is 0, long press “

UP

” + “

MODE

” button to switch from the normal display interface to

the data statistics interface.
The data statistics interface is used to calculate and display the data of single ride of E-bike. It includes
riding distance, max speed, Avg Speed, Calories consumption, CO

2

/ Fat reduction and linear statistical

chart of single riding speed.
Short press “

MODE

” button to switch to next page, long press “

MODE

” button the data statistics

interface will switch to the normal display interface automatically.
Note: the maximum statistical time range of linear statistical chart is 12 minutes, and it will be displayed
incrementally after more than 12 minutes.

Data statistics interface

5.5 Walk Assist Mode

Press and hold the “

DOWN

” button for 2 seconds to enter the Walk assist mode. The E-bike will travel

at a constant speed of 6km/h.

«
...
7
8
9
10
11
...
»

Summary of Contents for K5274



















Reviews:

No comments