SERVICE MANUAAL FOR MOBILE LOADING RAMP
APPLICATION METHOD
In order to make sure the safety, please keep the machine in good working
conditions, it is necessary to check the appearance and performance before
using . Checking content should includes:
1) Make sure all parts for the equipment are ready, and no damage.
2) Checking if there is oil leaking for the oil tube;
3) Checking all the screws are fastened of every crossing structures
4) Checking if there is barrier on slope benching
。
Operation steps
1. Adjusting the height of the loading ramp to make the connecting plate onto
the truck;
2. Make sure the chains are hooked with the truck, and adjust the length of
the chains(too short is also not suitable).
3. If with landing legs, rotate the handle to support the landing legs, make
sure the sole of the legs completely get onto the floor. It is forbidden to
adjust the height of the legs with any loading on the ramps.
4. Install the brake pads well.
5. After finishing above steps, loose the screw for oil returning of the manual
hydraulic pump, and make the hydraulic cylinder fall down which promise
the safety of the hydraulic system safe. Forklift is forbidden to run to the
loading ramp before loosing the screw on the manual hydraulic pump.
6. Please do not move the loading ramp in work process. Observe carefully
when the truck move forward or backward, it is necessary to release the
hook and adjust the height of loading ramp in time to avoid any hit or pull
the ramps by the truck.
