
TURNING OFF AND STORING THE COOKER AFTER USE
NEVER MOVE THE COOKER OR POT WHILE IN USE OR STILL
HOT [ABOVE 100
°
F(38
°
C)].
1. After each use turn OFF the King Kooker
®
at the appliance valve first, then at the gas shutoff
valve at the gas supply.
Check to make sure there is no flame and all valves are off.
The
gas must be turned OFF at the natural gas supply by closing the gas supply shutoff valve and
removing the appliance hose from the quick disconnect socket when the appliance is not in use.
To remove the hose, pull back the sleeve on the quick disconnect socket and pull out the hose.
The quick disconnect socket should be left attached to the gas source (house piping.) When
the appliance hose is removed from the quick disconnect socket, re-insert protective plugs into
the socket and appliance hose. Do not leave the cooker until it has cooled completely. When
removing food from the cooker wear protective mitts.
2. Storage of this cooker indoors is permissible only if the appliance hose is disconnected and
removed from the natural gas supply. Keep entire unit in area to avoid insects and contamination
that can clog the jet tube(s).
FAILURE TO FOLLOW THESE INSTRUCTIONS AND WARNINGS COULD RESULT IN FIRE,
EXPLOSION, BURN HAZARD OR CARBON MONOXIDE POISONING WHICH COULD CAUSE
PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.
MAINTENANCE OF OUTDOOR COOKERS AND ACCESSORIES
1. The area where the cooker will be used must be kept clear and free from combustible materials,
gasoline and other flammable vapors and liquids. Before each use of the cooker inspect and remove
any combustible items.
2. The flow of combustion and ventilation of air must not be obstructed. The cooker must be set in an
open area with 10ft. (3.05m) of space on all sides and no roof or overhang overhead. Check the
location and placement of the cooker before each use.
3.
Before each use of the appliance check the jet tubes for insects, insect nests, and other obstructions.
A clogged tube can lead to a fire beneath the appliance.
4. Follow all Lighting Instructions in the Use and Care section each time the cooker is used. Check the
flame for proper color and appearance. The flame should burn with a primarily blue color.
If the flame does not appear correct, there may be an obstruction in the orifice(s) (pg. 16 ). Turn off
the cooker and allow time for it to cool. Remove any obstructions in the orifice(s) using a thin wire or
pin. Light the cooker again as per the instruction manual. If this does not resolve the problem, please
call Metal Fusion, Inc. at 1-800-783-3885.
5. Always use the hose assembly supplied with the appliance. Before each use of the appliance check
the hose for evidence of kinks, abrasion, wear, cuts or leaks. If there is any damage to the hose, the
hose assembly must be replaced prior to using the appliance. Contact Metal Fusion, Inc. at (800)
783-3885 for information regarding a replacement hose assembly. Only the hose assembly specified
by Metal Fusion, Inc. should be used with the appliance.
6. For purchase of any replacement parts which may have become damaged or lost, please contact
Metal Fusion, Inc. at (800) 783-3885 between the hours of 7:30 am-3:30pm (CST) Monday through
Friday.
7. Cleaning of the appliance:
Cooker and Hose:
If necessary, remove any oil or liquid which has spilled onto the unit during
cooking with mild soapy water on a rag and towel dry. Do not immerse the burner unit or hose into
water as this will cause rust.
Aluminum or Stainless Steel Pots:
Clean after each use according to the directions below.
Cast Iron Cookware:
Clean after each use according to the directions below.
Thermometer:
Clean after each use with mild soapy water and towel dry.
Do not submerge in
liquid or put in dishwasher.
18
Summary of Contents for C90NG
Page 22: ...NOTES 22 ...
Page 23: ...NOTES 23 ...