GETTING TO KNOW & STARTING
YOUR DRILLING MACHINE
FIGURE 3
GETTING TO KNOW YOUR DRILLING MACHINE
Main Components (Fig.3)
1. Motor
2. Speed selectors
3. Speed plate
4. Oil filling opening (speed gearbox)
5. Oil pump indicator sight glass
6. Oil level sight glass
7. Oil draining plug
8. Tool ejector
9. Spiral spring housing/cover
10. Spindle
11. Depth stop lock knob
12. Rapid manual feed control
13. Oil filling access panel (feed gearbox)
14. Oil level sight glass
15. Oil draining plug
16. Feed selector (0.1 or 0.2 m/min.)
17. Automatic feed lever
Control Panel (Fig.4)
1. Coolant switch
2. Work light switch
3. Forward - Reverse switch
4. Low - High selector (speed selection)
5. Tap Return button
6. Drill - Stop - Tap button
7. Emergency Stop button
8. Stop button
9. Start button
0
1
2
3
4
5
6
7
28” VARIABLE SPEED gearhead DRILLING MACHINE
PERCEUSE À VITESSE VARIABLES AVEC TÊTE À ENGRENAGE 28”
mod.: KC-50
Imported by/Import par: King Canada Inc. Dorval, Quebec H9P 2Y4
Inches
Pouces
LR174325
Warning! Read and understand the instruction manual before operating. Do not expose to rain or use in damp locations.
Avertissement! Lire et comprendre le manuel d instructions avant d op rer. N exposez pas la pluie et n utilisez pas
dans des emplacements humides.
L
H
1
2
3
4
5
6
7
8
9
FIGURE 4
Control Panel- Turning the Drilling Machine On/Off
In order to turn the drilling machine on, make sure the emergency stop button
(7) is turned clockwise and pops out completely or else you will not be able to
activate the on-off functions. The control panel (Fig.4) on the front of the drilling
machine head comes with a start button (9), press this button to turn the drilling
machine on. To turn the drilling machine off, push the stop button (8). In case of
an emergency, push the larger emergency stop button (7).
This drilling machine comes with a work light, to turn the work light on, turn the
work light switch (2) to the right.
