WALLS AND LEGS ASSEMBLY
Step 1
Unfold each of the walls.
• The back wall
• The 2 side walls
Step 2
Find the hook & loop fastening strips on one length of the first sidewall to be assembled. These strips are to
be placed on the top pipe of your canopy structure by wrapping the fastening strips over the perimeter poles.
Repeat with second side wall, rear wall and front wall.
NOW, CONNECT THE LEG POLES TO THE ROOF ASSEMBLY WITH THE COVER ALREADY POSITIONED ON
TOP OF THE UNIT.
Step A: First insert the pipes for the middle poles into the 3- and 4-way
connectors, and then connect the end leg pipes in the same way.
(See illustration)
Step B: Push the eight foot pads onto the bottom of each leg.
NOTE: the foot pads are NOT for anchoring the canopy!
Step C: Connect the hook & loop fastening strips down
the length of each leg.
Step 3
After connecting the top of the side walls and installing the leg pipes into the connectors on the perimeter of
the unit, use elastic ball straps to connect the end of each sidewall to the 4 corners of the unit.
IMPORTANT! Once the legs and cover are assembled, your canopy will act like a kite in the wind. It is
imperative that the canopy anchors be installed NOW!
