ROOF FRAME ASSEMBLY
1- Start assembly with top frame as shown
Diagram A
in Diagram A. The 36 inch pipes are
used for the roof rafters and 69 inch
pipes form the length of frame. Start
assembly with center peak as circled
in Diagram A.
Diagram B
Diagram C
36 Inch Pipe
69 Inch Pipe
2- Once you have assembled the roof frame,
insert the legs on one side using the
69 inch pipes with the foot pads installed.
69 Inch Pipe
3- With the top frame laying over on one side
and the legs inserted on the other side as seen in
Diagram B, drape the one piece cover with
sides and rear wall over the frame.
Make sure you have the open end in
the direction needed. Pull the one side
down over the frame with the legs
inserted. You can also pull the rear
over the frame partially. Next, insert
the legs on the opposite side and pull the
remainder of the cover on.
Foot Pad
Front
Side
www.northlineexpress.com
1-877-734-2458
