12) Now that all the ball straps are
attached. Insert the 6X6-2PC leg pipe
into each plastic foot pad and then insert
a plastic sleeve into the other end of the
leg pipe.
13) Begin to attach the legs to the frame.
Place each leg next to the three and four
way fittings. Starting with the two outside
legs grab the base of the 3-way corner
fitting. Lift the frame and insert the open
3-Way fitting into the leg. Next insert the
center legs.
15) Repeat step on other side until the
entire unit is standing upright.
15) Pull down and attach the leg skirt
straps to the foot pads at each corner.
Next attach the valance straps by clipping
the plastic hook to the open grommet
hole located on the cover’s valance
(4 total). Hook the plastic ring around the
foot pad and tighten.
LEG ASSEMBLY
Insert First
Insert First
Insert Second
