OPERATION
ADJUSTING THE LIGHT DIRECTION
Your work light can be tilted vertically up to 30°
down or 90° up. To adjust the light direction, loosen
the side locking knobs (A) Fig.7. Adjust the work
light head to desired position, and retighten knobs.
ON/OFF SWITCH
Each work light is equipped with a weather
protected sealed ON/OFF switch (A) Fig.8 located
on the back side of the work light. Press the switch
once to turn the work light on and press the switch
a second time to turn it off. Always turn the work
light off before unplugging from power source.
MAINTENANCE & SERVICE
Your work light requires very little care and
maintenance. Simply clean the lens regularly with
a non-abrasive cleaner. Use similar care for the
base and U-bracket. When servicing, use only
identical parts. Use of any other parts may create
a hazard or cause product damage. Contact a King
Canada service centre for identical replacement
parts.
WARNING:
Always make sure the work light is unplugged and completely cool before
attempting to clean it.
RECYCLING
Do not dispose of electrical appliances as unsorted municipal waste, use separate
collection facilities. Contact you local government for information regarding the collection
systems available. If electrical appliances are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into the food chain, damaging your
health and well-being.
FIGURE 7
FIGURE 8
OPERATION
& MAINTENANCE
PARTS DIAGRAM & PARTS LISTS
Refer to the Parts section of the King Canada web site for the most updated parts diagram
and parts list.
