1. KNOW YOUR TOOL
Read and understand the owners manual and labels affixed to the
tool. Learn its application and limitations as well as its specific
potential hazards.
2. KEEP GUARDS IN PLACE.
Keep in good working order, properly adjusted and aligned.
3. KEEP WORK AREA CLEAN.
Cluttered areas and benches invite accidents. Make sure the floor
is clean and not slippery due to wax and sawdust build-up.
4. DON’T USE IN DANGEROUS ENVIRONMENT.
Don’t use power tools in damp or wet locations, or expose them
to rain. Keep work area well lit and provide adequate surrounding
work space.
5. KEEP CHILDREN AWAY.
All visitors should be kept a safe distance from work area.
6. MAKE WORKSHOP CHILD-PROOF.
-with padlocks, master switches or by removing starter keys.
7. DON’T FORCE TOOL.
It will do the job better and safer at the rate for which it was
designed.
8. USE PROPER EXTENSION CORD
Make sure the extension cord is in good condition. When using an
extension cord, be sure to use one heavy enough to carry the
current your tool will draw. An undersized cord will cause a drop in
line voltage resulting in loss of power and overheating. See
electrical information page for table showing correct size to use
depending on the cord lenght and the nameplate amperage rating.
If in doubt, use the next heavier gauge. The smaller the gauge
number, the heavier the cord.
9. WEAR PROPER APPAREL.
Do not wear loose clothing, gloves, neckties or jewelry (rings,
watch) which may get caught in moving parts. Non-slip footwear is
recommended. Wear protective hair covering to contain long hair.
Roll up long sleeves above the elbows.
10. ALWAYS WEAR SAFETY GLASSES.
Also use a face or dust mask if cutting operation is dusty. Always
wear safety glasses (ANSI Z87.1). Everyday eyeglasses only have
impact resistant lenses, thet are
NOT
safety glasses.
11. DON’T OVERREACH.
Keep proper footing and balance at all times.
12. MAINTAIN TOOL WITH CARE.
Keep tools sharp and clean for best and safest performance.
Follow instructions for lubricating and changing accessories.
13. DISCONNECT TOOLS.
Before servicing, when changing accessories or attachments.
14. AVOID ACCIDENTAL STARTING.
Make sure the swich is in the ‘’OFF’’ position before plugging in.
15. USE RECOMMENDED ACCESSORIES.
Consult the manual for recommended accessories. Follow the
instructions that accompany the accessories. The use of improper
accessories may cause risk of injury to persons.
16. CHECK DAMAGED PARTS.
Before further use of the tool, a guard or other parts that are
damaged should be carefully checked to ensure that they will
operate properly and perform their intended function. Check for
alignment of moving parts, binding of moving parts, breakage of
parts, mounting, and any other conditions that may affect its
operation. A guard or other parts that are damaged should be
properly repaired or replaced.
17. NEVER LEAVE MACHINE RUNNING UNATTENDED.
TURN POWER OFF.
Don’t leave any tool running until it comes
to a complete stop.
SPECIFIC SAFETY RULES
Warning!
When using electric grass trimmers, basic safety
precautions, including the following, should always be followed to
reduce the risk of fire, electric shock and personal injury.
1. Make sure your extension cord is in good condition.
When using
an extention cord, be sure to use one heavy enough to carry the
current your product will draw. A wire gauge size (A.W.G.) of at least
14 is recommended for an extension cord 50’ (15m) or less in
length. If in doubt, use the next heavier gauge. The smaller the
gauge number, the heavier the cord. An undersized cord will cause
a drop in line voltage, resulting in loss of power and overheating.
2. Before operating
, check the tool’s cord and the extension cord for
signs of damage or aging. If either cord becomes damaged during
use, disconnect it from the power supply immediately. DO NOT
TOUCH THE CORD BEFORE DISCONNECTING. Do not use the
grass trimmer if the cord is damaged or worn.
3. Read the instructions carefully
. Be familiar with the controls and
proper use of the grass trimmer.
4. When not in use
, grass trimmer should be stored indoors in a dry,
secure location out of the reach of children.
5. Maintain tool with care.
Keep fan area clean for best and safest
performance. Follow instructions for proper maintenance.
6. Keep extension cord
away from cutting line.
7. Check air vents
. Keep air vents free of debris which can restrict air
flow and cause damage to the grass trimmer.
8. Do not unplug by pulling on extension cord
. To unplug, grasp the
plug, not the extension cord.
9. To reduce risk of electric shock
, do not expose to rain, do not use
on wet surfaces. Store indoors.
10. Never douse or squirt the unit with water
or any other liquid.
Keep handles dry, clean and free of debris. Clean after each use.
See Maintenance instructions.
11. Avoid using the grass trimmer
, while people, especially children
or pets, are nearby.
12. Only use the grass trimmer
in daylight or in good artificial light.
13. Never operate the grass trimmer
with a damaged guard or
without the guard installed.
14. Only switch on the motor
when your hands and feet are away
from the cutting line.
15. Never attempt to install
a metal cutting line in this grass trimmer.
16. Inspect and maintain
the grass trimmer regularly. Only have the
grass trimmer repaired by an authorized technician.
17. After manually extending new cutting line
, always return the
grass trimmer to its normal operating position before switching on.
GENERAL & SPECIFIC SAFETY INSTRUCTIONS
FOR ELECTRIC GRASS TRIMMERS