King Canada 8500BVM Instruction Manual Download Page 4

GETTING TO KNOW YOUR

BLOWER/VACUUM/MULCHER

1. Blower attachment.

Gets installed to air outlet for blower

function.

2. Variable speed dial.

Adjust air speed (blower mode) or air

volume (vacuum/mulcher mode).

3. Shouler strap installation area.

For convenience, clip the

shoulder strap to the handle before operating.

4. Extension cord lock system.

Prevent the extension cord from

being unplugged during use.

5. Power cord (polarized).
6. Blower air inlet safety guard.

To operate in blower mode, it must

be installed to the blower air inlet.

7. Main vacuum/mulcher collection tube with handle.

To operate

in vacuum/mulcher mode, it must be installed to the blower air
inlet.

8. Lower section of vacuum/mulcher collection tube.
9. Washable leaf collection bag.
10. Leaf collection bag attachment.
11. Blower/vacuum/mulcher motor.
12. On/Off switch.

MODEL 

8500BVM

Air speed range

180-320 Km/h (112-200 MPH)

Air volume range

110-350 CFM

Mulch ratio

16:1

Impellor size

4-3/4”

Collection bag capacity

45L

No load speed

15,000 RPM

Motor

12 Amp.

Voltage

110V, 1 phase, 60 Hz

Dimensions (LxWxH)

48” x 8” x 38”

Weight

9 lbs

Summary of Contents for 8500BVM









Reviews: