Kinetik Wellbeing 842/5773, User Manual

Page: 9 / 29

Setting the time, date and alerts
Time and Date
Once the batteries are inserted and the battery cover is back into place, the display will flash the Year 2017 in the bottom left
corner. Alternatively, press and hold the SET button to start the process.
To adjust the Year press the MEM button repeatedly until correct (pressing and holding the MEM button will advance the year
rapidly). When the correct Year is shown, press the SET button. The display will then show the Day/Month for you to adjust.
With the Day/Month displayed on screen, press the MEM button to adjust the Day and press the SET button to select the Month.
Again, adjust the Month using the MEM button. Once complete, press the SET button to adjust the hours and minutes. Adjust hours
and minutes by pressing the MEM button.
You can now set 3 Alerts to complete setup.
Setting Alerts
The BPX2 has 3 Blood Pressure measurement alerts. Users can have 1, 2 or 3 alerts that will repeat every 24 hours.
Setting Alert 1
After setting the time and date, AL 1 (Alert 1) will be displayed on screen. Press MEM to select if the alert should be ON or OFF.
Once you have made a selection, press the SET button to confirm.
8
请
用AI或EPS
档
案印刷。
PDF文
档
只供参考，不可用于印刷，
敬
请
留意。