1.Ear temperature measurement
Warm prompts:
Remove the head cover
of forehead thermometer
which can measure ear
temperature.
10
09
MEM
1.1 After removing head cover, please press“ ”button
on this product to enter the ear temperature
mode, LCD will display measurement
put the thermometer in your ear,
be measured directly by
pressing“ ”button.
to turn
measurement
value last time. Then
the ear temperature can
1.2 After 1 second, you can see the measurement result.
When LCD is flashing,
we are waiting for
starting measurement.
Measurement result
Note:
If you did not hear the beep sound, which represents
the temperature measurement has not yet been completed.
Please do not remove the thermometer probe from ear canal
at this time. (If you have closed the sound indication, it will
have no sound indication.)
2
.
Forehead
t
emperature measurement
Warm prompts:
Install head cover of
forehead thermometer
which can measure
forehead temperature.
2.1 After installing head cover of forehead thermometer,
press“ ”button to turn on this product to enter the
forehead temperature measurement mode, LCD will
display measurement value last time. Then the
forehead thermometer is aimed at the center of the
forehead and measurement distance should be
0~5mm, the forehead temperature can be
measured directly by pressing “ ” button.
2.2 After 1 second, you can see the measurement result.
When LCD is flashing,
we are waiting for starting
measurement.
Measurement
result
Note:
If you did not hear the beep sound, which represents
the temperature measurement has not yet been completed.
Please do not remove the thermometer probe from forehead
at this time. (If you have closed the sound indication, it will
have no sound indication.)
3. Object pattern measurement
Warm prompt:
The installation of the head cover of forehead temperature
has no influence to object pattern measurement.
3.1 Long press“ ”button to enter the object measurement
mode for 6 seconds, and then aim the thermometer at
object, the temperature of the target object can be
the
measured directly by pressing
button.
“ ”
3.2 After 1 second, you can see the result of the measurement.
When LCD is flashing,
we are waiting for starting
measurement.
Measurement
result
Note:
If you did not hear the beep sound, which represents the
temperature measurement has not yet been completed. Please
do not remove thermometer probe from target object at this time.
(If you have closed the sound indication, it will not have sound
indication.)
Product cleaning methods instructions
1. About thermometer probe: please use cotton swab to dip alcohol
without water to clean thermometer probe to avoid cross infection
after we finish temperature measurement every time.
(Note: please don't wash the product directly
under the faucet.)
2. This product itself: please wipe the product with a soft and dry
cloth to avoid scratching of the product; please do not clean the
product directly with water.
0~5mm
