9
Using your Blood Pressure Monitor
Re-measuring
If you want to measure again, just press the
button.
Leave at least three minutes between measurements to allow blood circulation to the arm
to return to normal.
Do not measure your blood pressure too many times in one session as it may cause
discomfort in the arm.
If you feel any discomfort or pain, turn the monitor off and remove the cuff immediately.
Reading stored results from the memory
a. Press button “M” when the monitor is off to enter the memory mode. The LCD will show the number of
results stored, then the most recent result will be displayed (the “01” in the top left of the LCD is the
memory number), as in the picture. Continue pressing the “M” button to progress through the stored
results (memory number will increase by one each time)..
