When Measuring ...
Problem
Root Cause
Solution
Your feet are too dry.
Abnormal
measuring results:
- Too high; OR
- Too low; OR
- Huge difference
between two recent
measurement.
No display on
LCD when the
device powers on.
CANNOT proceed
to analyze BMI,
body fat, total body
water, muscle mass
and bone mass.
The device
powers off.
Wipe your feet with a damp
cloth, keeping them slightly damp
when starting measurement.
Batteries not yet installed.
Worn batteries.
Low battery.
Install the batteries.
(Please refer to Insert the
Batteries)
Replace CR2032 battery.
Please ensure to purchase an
authorised battery.
Replace CR2032 battery.
Please ensure to purchase an
authorised battery.
Step onto the platform
wearing socks or shoes.
Please keep barefooted during
the measurement, and keep full
contact with the electrodes as
well.
The system cannot
identify the possible User ID
with most similar data.
Please assign a User ID
following the instruction in Set Up
Your Profile.
The user fails to select
the User ID from what the
system found.
Please assign a User ID
following the instruction in Set Up
Your Profile.
Incorrect posture
Please step on the platform
barefooted and stand still.
The device is located on
the soft ground such as a
carpet OR on a rugged
surface.
Please place the device on a
flat, hard surface.
Troubleshooting
Specifications
Specifications
Product Name
Dimension
Body Analyser Scales
Net Weight
Display
Measurement Unit
Measurement Range
Division
Accuracy
Working Environment
Storage Environment
Power Source
3V (One CR2032 Battery)
Turn on Method
SENSE ON technology
Auto-OFF
Accessories
1. One CR2032 battery
2. User Manual
Mode of Operation
Continuous Operation
The scale will turn off after about 10 seconds if there is
no operation
About the Accuracy of This Product
This product passes strict inspection before delivery and therefore its accuracy is guaranteed by the manufacturer.
Please refer to the above table for the descriptions on accuracy.
This product is specially designed for body fat analysis as well as weight measurement. It should NOT be used by
anyone during the process of transaction for verification of goods’ weight.
150kg
；
330lb
；
23st
：
8lb
50kg: ±0.2kg;
150kg: ±0.4kg;
100kg: ±0.3kg;
Temperature: 5
℃
to 40
℃
Temperature: -20
℃
to 60
℃
Relative Humidity: ≤90% RH
Atmospheric pressure: 86kPa to 106kPa
Atmospheric pressure: 50kPa to 106kPa
Relative Humidity: ≤85% RH
Approximately 1.28kg ( Excluding the cells)
Digital LCD
Scale: 300x300x22.2mm (Approximately)
Kilogram / Stone/ Pound
0.1kg / 0.2lb
Degree of protection
Type BF applied part
