Kinetico KUBE 15, User Manual

Page: 39 / 68

39
EN
DATA OVER THE APPLICATION OF THE SYSTEM:
Source of water to be treated:
PUBLIC SUPPLY NETWORK
OTHER
* Previous treatment to the system:
* Inlet system hardness (ºF):
* Inlet water hardness (ºF):
* Residual harness(ºF):
* Inlet system pressure (bar):
INSTALLATION CHECK-LIST:
Pre-filter installation: Fittings installation:
Isolation bypass installation: Pressurized system tightening:
Overflow system installation: Inlet hardness measurement:
Proper drain istallation: System programming:
Start-up according to protocol: Outlet hardness measurement:
Brine intaje / tank filling confirmation: Residual hardness adjustment:
COMENTARIOS
* Results of installation and set-up:
CORRECT (system installed and working correctly. Water produced can be used).
OTHER:
INDENTIFICATION OF THE AUTHORIZED TECHNICIAN: CONFIRMATION:
*Maintenance contract reference:
ACCEPTS the maintenance contract
DOES NOT ACCEPT the maintenance contract
Model/Ref.:
Owner:
Adress:
Phone:
Location:
City: ZIP:
13. INSTALLATION REGISTRATION SHEET
NOTES FOR THE TECHNICIAN/INSTALLER: Read this Manual carefully. If you have any doubts, get in touch with the Tech-
nical Assistance Service (T.A.S) of your distributor. The data market with * must be filled by the installing technical and
transcribed in the WARRANTY SHEET. This sheet must be preserved by the installer/distributor and may be required by
the distributor for the purpose of improving after-sale and customer service. The technician that performs the insta-
llation and set-up of the equipment must be in possession of the appropriate skills.
COMPANY OR AUTHORIZED INSTALLER, DATA, SIGNATURE:
I have been clearly informed of the use, manipulation and main-
tenance that the installed equipment requires and I have been
offered a maintenance contract and informed of how to contact
Customer Service if I need information, if I need to notify any
damages or malfunctioning, request a maintenance service or
request the intervention of a technician.
SYSTEM WARRANTY FOR THE DISTRIBUTOR:
Will bear the responsability only and exclusively the substitution
of the parts in case of non-conformity. The reparation of the
equipment and the expenses that this will entail (labor, trans-
portation costs, displacements, etc), will be the responsability
of the distributor, in accordance with what is outlined in the ge-
neral conditions of sale, which will not be transferable to the
manufacturer.
Comments: