Kinetic Solar
65 Martin Ross Ave. Unit 1
www.Kineticsolar.com
1-416-665-3755
Commercial | Residential | Industrial | Institutional
Fixed Angle Ground Mount Installation Guide
13
Revised Aug-2020
©2020 All Rights Reserved
Step 4: Mount Hat Rails
a.
Mount the hat rails to the splice plates that have been installed on the A-
Frames. Hat rails always attach to the innermost set of holes of the
splice plate.
b.
The splice plates have slots to accommodate the hat rail in order to
provide some tolerance for error. It is best to install the bolt in the
middle of the slot wherever possible.
c.
The hardware must be assembled in the following order from top to
bottom:
i.
5/16” x ¾” bolt
ii.
Lock washer
iii.
Flat washer
iv.
Hat rail
v.
Flat washer
vi.
Hex nut
a.