INSTALLATION
* The product image may be different from the actual product.
1.
Turn “Dome Cover” counterclockwise to the end and take it off.
2.
Mark the positions of one “power and video line hole” and four “screw holes” on the ceiling.
Drill a hole on the proper position of the ceiling for the power and video line to pass through.
And then screw “base” to the ceiling.
Note: Screws for installation are not supplied within the sales package.
Please prepare by yourself and use proper screws.
Suggestions:
a) For safety, please let the power and video line concealed behind the ceiling.
b) If the installation spot doesn’t allow the installation personnel to screw power and video line hole on the
ceiling, they could cut the concave edge of “base” to let the power and video line pass through. Be sure
to cover the line to prevent violent attack.
3.
Adjust the view angle of the lens. Then put “dome cover” back to the “base” and turn clockwise.
CONNECTION
1. DC12V Input Terminal
Connect the power terminal of the camera to a 12V DC regulated power supply.
Note: Please use the correct power adaptor, DC12V (regulated), to operate this unit. The power tolerance of
this unit is DC12V ± 10%. Over maximum DC 12V power input will damage this unit.
2. Video Output Connector (VIDEO OUT)
Connect the camera video output and the monitor video input with 75Ω coaxial cable.
Dome Cover
Power & Video
Line Hole
4 Screw Holes
