INTRODUCTION
Congratulations on your purchase of this product which
adopts the latest SONY CCD image sensors and drivers.
This PIR style covert ‘spy’ camera is discreet and attractive.
Is designed for indoor applications and offers high
definition,
image stability, strong anti-jamming, with rich and real
colours. Whilst being easy to install and to operate.
Please read this instruction manual carefully to ensure prop-
er use of the product.
CONNECTING
PRODUCT FEATURES:
*
*
*
*
Sensor
((((
CCD
))))
SONY 1/3
"
CCD image Sensor.
*
Intergal Audio Microphone included
*
*
*
*
Auto Gain Control (AGC)
Built-in auto gain control
(AGC)
circuit. The colour
camera
achieves a high definition picture under low Lux
conditions.
*
*
*
*
Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The colour
camera’s AES speed can reach
1/100,000
s.
*
*
*
*
Gamma Characteristic
Camera Gamma characteristic
is
0.45.
*
*
*
*
Scanning Mode
NTSC
or PAL
mode.
DC12V
Power Supply
Monitor
KC-PIRCS
TROUBLE AND SOLUTION
Link wire rule
：
Power
Video
Note
: : : :
●
Please note the camera’s operating temperature and its using
1. No Picture after Power-up
. May be due to power supply voltage abnormality, please check the power
supply voltage and polarity.
. Please check all the connecting cable and monitors are connected
Correctly.
2. The picture has flowing interference ripples
. May be caused by power supply AC ripples, or video signal ground loop
interference.
. Check the monitor and peripheral equipments used.
3. The picture background colour changes continuously
. The fluorescent lamp’s electromagnetic field can cause colour roll. This is a
recognized phenomenon with CCD cameras.
. Reduce the number of fluorescent lamps or increase the distance between
the camera and the fluorescent lamps to improve it.
. Using a power supply external sync. camera can resolve it.
4. Picture smear
. The power supply’s voltage maybe unstable
.
. Connecting cables not connect correctly or have high impedance.
To prevent fire or shock hazard. Do not expose the unit
The symbol is intended to alert the user to the presence of
The symbol is intended to alert the user to the presence of
to rain
or moisture.
important operating and maintenance (servicing)
Instructions in the literature accompanying the appliance.
uninsulated ‘dangerous voltage’ within the product’s
enclosure
that may be of sufficient Magnitude to
constitute
a risk of electric shock to persons.
Notes
：
：
：
：
●
A regulated 12VDC Power supply is required. Its output voltage
、
current
、
voltage polarity
and operating temperature
must match the
camera’s requirement
.
Video
12V DC
CAUTION:
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK
DO NOT REMOVE COVER OR BANG OR KNOCK ANY USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO OUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC. DO NOT OPEN
CAUTION:
To prevent electric shocks and risk of fire hazard,
do NOT use other than specified power source.
Audio