HOW TO ASSEMBLE THE HOOD:
1. Firstly, thread the 2 hood supports through the fabric hood situated on the underside; 1 to support the
front and 1 to support the middle of the hood
2. Place the screws on the inside of the basket, 1 on either side. In 1 of the holes near to the handle.
3. On both supports, there is a hole at the ends; place these onto the screw- you must ensure that the
front support goes on first, followed by the middle, to stop the straps from crossing over.
4. Fit the nut on to the screw, from the outside of the basket- ensuring it is tightened to where you
desire the hood, you can adjust the screws accordingly.
5. Lastly, use the elastic loops to hook over the nuts on both sides of the basket, and tuck the ends of
the canopy over, pull the back fabric of the hood over the basket, to create the canopy.
ADJUSTING THE HOOD
The hood can
be adjusted to any desired angle by tightening the screws situated at the joint of the hood.
CLEANING INSTRUCTIONS
BASKET:
Sponge lightly with warm water and mild detergent
..
MATTRESS:
If necessary wash by hand in warm water and mild detergent. Dry away from direct heat or
sunlight. Do not tumble dry. Do not dry clean.
DRESSING:
All covers are washable, we recommend you wash at 30°C with a fabric softener to obtain the
..
CARE OF YOUR BASKET:
All covers are washable. Please wash at 30°C with a fabric softener to obtain
best results.
Please store in a cool dry place when not in use
.
Dispose of all packaging safely before use. Complies with BSEN 1466:2014.
best results.
Hood Support
Hood Support
1.
2.
3.
5.
4.
Elastic Loop
Attach Nut
1
2
TO DISASSEMBLE THE HOOD FOLLOW STEPS IN REVERSE.
