Step 4
Attach Nut
HOW TO ASSEMBLE THE HOOD
*comes already assembled
TO DISASSEMBLE THE HOOD FOLLOW STEPS
IN REVERSE:
ADULT ASSEMBLY REQUIRED
1. Firstly, thread the 2 hood supports through the fabric hood situated on the
underside; 1 to support the front and 1 to support the middle of the hood
2. Place the screws on the inside of the basket, 1 on either side.
In 1 of the holes near to the handle.
3. On both supports, there is a hole at the ends; place these onto the screw-
you must ensure that the front support goes on first, followed by the middle,
to stop the straps from crossing over.
4. Fit the nut on to the screw, from the outside of the basket- ensuring it is
tightened to where you desire the hood, you can adjust the screws accordingly.
5. Lastly, use the elastic loops to hook over the nuts on both sides of the basket,
and tuck the ends of the canopy over, pull the back fabric of the hood over the
basket, to create the canopy.
IMPORTANT - RETAIN FOR FUTURE REFERENCE
B6 7JJ
Step 1
Step 2
Step 5
Step 3
Hood Support
Hood Support
Elastic Loop