SMART 6-STAGE BATTERY CHARGER AND
MAINTAINER - RV & MARINE
PROBLEM
INDICATION
POSSIBLE CAUSES
SOLUTIONS
Charger does
not work?
NO Indicator lights ON
- NO AC power
- Check AC connections and
make sure the AC Power Point is
switched ON.
- Try a different AC Power Point
which you know is working.
Charger has NO
DC output?
Fault RED LED is ON
OR
GREEN power LED ON or
flashing
- Output is short circuited
- Reverse polarity protection
- Loose / bad connection to the battery
- Check DC connection between
charger and battery and make
sure they are not short circuited.
(Touching each other)
- Check that the crocodile clips
have not fallen off or come loose.
- Check that the crocodile clips/
ring terminals are connected to
the correct polarity.
Note:
The charger output is only
present when connected to a
battery.
NO charging current?
Fault RED LED is Flashing
- Battery is severely sulphated
- Battery has a damaged cell
- Over temperature protection mode
- Check the battery condition,
age etc.
- Battery may need replacement.
- Move battery & charger to a
cooler environment.
The full / float light won’t
come ON.
Fault RED LED is Flashing
- Battery Ah capacity too large for the battery
charger and it has timed out
- Battery is defective
- Battery is severely sulphated
- Check the charger specifications
match the battery capacity. Eg.
make sure battery capacity is not
too big for the charger.
- Battery may need replacement.
TROUBLESHOOTING
In the event you believe your Battery Charger is not functioning correctly, please contact Kincrome
Customer Service, (1300 657 528) before returning the item to your place of purchase. Our technical
team may be able to rectify your issue over the phone.
REPLACEMENT PARTS
For the full range of replacement parts and accessories, please visit our website
www.kincrome.com.au
Warranty given by Kincrome Australia Pty Ltd of 3 Lakeview Drive, Caribbean Park, Scoresby, Victoria (Tel 1300 657 528). The applicable warranty
period (24 months) commences on the date that the product is purchased. If this product has materials or workmanship defects (other than defects
caused by abnormal or non warranted use) you can, at your cost, send the product to place of purchase, an authorised Kincrome service agent or one
of Kincromes addresses for repair or replacement. Your rights under this warranty are in addition to any other rights you have under the Australian
Consumer Law or other applicable laws. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For further
details please visit www.kincrome.com.au or call us. Due to minor changes in design or manufacture, the product you purchase may sometimes
differ from the one shown on the packaging.
Technical support is provided by Kincrome Tools or charger partner, OzCharge Corporation. Call Kincrome Customer Service on 1800 657 528
if assistance is required.
24
National Head Office
National Distribution and Showroom
3 Lakeview Dve, Caribbean Business Park
Scoresby Victoria 3179 Australia
E
W
kincrome.com.au
Administration
T
(03) 9730 7100
F
(03) 9730 7199
ABN 41 007 185 006
Customer Service Centre
T
1300 657 528
F
1300 556 005
National Head Office
National Distribution and Showroom
3 Lakeview Dve, Caribbean Business Park
Scoresby Victoria 3179 Australia
E
W
kincrome.com.au
Administration
T
(03) 9730 7100
F
(03) 9730 7199
ABN 41 007 185 006
Customer Service Centre
T
1300 657 528
F
1300 556 005
Made to Kincrome Tools & Equipment Pty Ltd Global
specifications and quality standards in China
Australia & Global
UK & EU
www.kincrome.com.au
www.kincrome.co.uk
[email protected] [email protected]
KP87004 OzCharge Manual.indd 10
5/03/2018 2:24 PM