9
SMART 8 STAGE BATTERY CHARGER &
MAINTAINER 12V 1.5 AMP
•
Battery Analysis - BLUE LED ON
The battery analysis stage checks the condition of the battery after the charge cycle is
completed. If the battery Voltage drops too quickly during the analysis mode, this means
the battery is probably faulty. This is indicated by both the YELLOW charging LED and
GREEN full LED being ON.
•
Float Mode - Full / Float GREEN LED ON
This stage allows you to keep the charger connected 24/7 to ensure your battery is well maintained
and kept 100% fully charged. Float mode will maintain the battery at a constant 13.6V.
•
Long Term Maintenance - Full / Float GREEN LED ON
During long term maintenance / float mode, the unit will apply a special pulse charge to
ensure the battery is kept in optimal condition.
5. Disconnecting the Battery charger from Battery
• If the Battery is out of the vehicle:
(1) Switch OFF and Remove the AC Pin Plug from the outlet.
(2) Remove the BLACK lead and then the RED lead.
• If the battery is still in the vehicle:
(1) Switch OFF and Remove the AC Pin Plug from the outlet.
(2) Remove the lead from the vehicle chassis.
(3) Remove the lead from the battery.
Note:
Check electrolyte levels if possible after charging as they may need topping up with distilled water.
(This does not apply to sealed maintenance free batteries)
KP87002 OzCharge Manual.indd 9
5/03/2018 2:25 PM