4
GAS SOLDERING IRON KIT
UNPACKING
a.
Unpack all the components from the packaging.
b.
When unpacking the KP15001 Gas Soldering Iron, carefully inspect for any damage that may have occurred during transit.
c.
Check for loose, missing or damaged parts.
d.
Ensure all packaging materials are disposed of as per your local council guide lines.
REFILLING OPERATION
Note: Gas soldering Iron does NOT come filled with gas.
WARNING!:
Before each use and after refilling, listen for leaks. Never use a flame to check for leaks, always use
soapy water to identify leaks in gas.
a.
Ensure that the gas soldering iron is extinguished and cool before refilling.
b.
Allow sufficient time for the KP15001 to cool to room temperature before refilling the gas soldering iron with fuel.
c.
Refill KP15001 in a well-ventilated area, free of fire or other sources of ignition, away from bystanders and any
flammable substance.
d.
Never smoke while refilling the KP15001.
e.
Hold the KP15001 with the FILL VALVE (9) facing upwards (located on the base of the KP15001).
f.
Invert the refueling canister (not supplied), then insert the butane canister tip into the FILL VALVE (9). Adaptors may be
needed, depending on refueling canister type (not supplied).
g.
Push the butane canister and KP15001 together and allow gas to flow into the GAS LEVEL WINDOW/ TORCH TANK (8).
h.
The KP15001 should take approximately 5 to10 seconds to fill.
i.
Stop refilling once the gas begins to expel from the FILL VALVE (9).
j.
Wait approximately 2 minutes to allow the gas to stabilize before igniting the KP15001.
Case Layout
A. Gas Soldering Iron
B. Solder In Dispenser
C. Tip Cooling Tray
D. Gas Soldering Iron Standing
Work Station
E. Tip Cooling Tray with Sponge
F. Deflector
G. Solder In Dispenser Standing
Work Station
H. Anvil Soldering Tip
I. Needle Soldering Tip
J. Chisel Soldering Tip
A
B
C
D
E
F
G
H
I
K
J
K. Protective Cap
Summary of Contents for KP15001
Page 10: ...1 0 www kincrome com au ...
