2
TOOL TROLLEY 5 DRAWER
Part No. K7645
Step 1: Assembly Preparation
Remove all contents from box. Reference the parts list to
make sure you have all the parts.
Place a cover on the floor to prevent any damage to surface of the Trolley.
Castors are prefitted on large trolleys.
Step 2: Attaching Castors
Using two people, tip the trolley so it is laying drawer side up.
Align holes in locking and non-locking Castors with matching
holes in the bottom tray as shown in figure 2. Attach using
13mm x 16 Hex bolts, lock washers and flat washers from
Castor bolt kit and tighten.
Ensure that both locking Castors are on same end of the Trolley.
We suggest mounting locking Castors at the Handle side of the Trolley.
Step 3: Attaching the Side Handle
Align the mounting holes of the handle brackets with the holes
in the side of the Trolley. Attach using the Hex Bolts
Ensure drawers are fully closed prior to closing lid and locking the chest
READ CAREFULLY BEFORE USE:
Pt1. Using the manual drawer retention system requires users
to close all drawers until it clicks into the closed position.
Pt2. Locking: ensure all drawers are in the closed position.
Drawers will not lock if they are not closed correctly.
Pt3. For any issues regarding locking/closing this toolbox please
call Kincrome on 1300 657 528.
