kincrome K16127, Owner'S Manual

Page: 23 / 31

Operation - Using the Boom Kit (continued)
22
5. Adjust pressure
regulator
Turn pressure regulator knob to adjust outlet pressure
1. Turn knob clockwise to increase pressure.
2. Turn knob counter-clockwise to decrease pressure
Note: If the pressure regulator knob is completely tightened, the pressure setting
will be higher than the pressure switch on the pump. This allows the pump to
operate as a demand pump and turn on only when spraying
6. Begin agitation if
needed
Some formulations of liquid pesticides do not remain in solution and
should be agitated to maintain a uniform mix.
The
pressure regulator
bypasses fluid back to the tank. Adjust the knob to
divert spray back to the tank to keep chemicals well-mixed. It should be used
when spraying pesticides classified as "flowable" ("F" or "L"), "wettable
powder" ("WP" or "W"), "emulsion" ("EC" or "E"), "microencapsulated"
("M"), or water dispersible granules ("WDG" or "DF"). (See pesticide label to
determine its classification.)
7. Operate broadcast
boom
A. Open boom nozzle valves
Open the left, right, or both boom valves as desired.
Fig06519
Fluid bypass
Pressure gauge
Pressure regulator
knob
Boom nozzle valves