kincrome K13012, Manual

Page: 6 / 12

5
RANGER 12V AIR COMPRESSOR
Connecting/Disconnecting Adaptors (14, 15, 16 or 17) to the Air Supply Hose (9)
WARNING! Ensure the compressor is OFF and disconnected from the power supply before changing adaptors.
1. Gather the accessory you wish to attach your Air Supply Hose (9).
2. Hold the Easy Grip Valve Locator (7) securely and simply thread the adaptor onto the Brass Coupler (6), thread clockwise.
3. Your 12V Air Compressor is now ready to blow up sporting equipment, air matresses or bike tyres.
4. Turn the recently installed adaptor (14, 15, 16 or 17) anti-clockwise to remove.
Operation
WARNING: Only inflate products to the manufacturers specifications. Vehicle tyre pressure can genrally be found in the
vehicles handbook, on the door pillar or on the inside of the fuel filler door.
WARNING! Ensure the compressor is OFF and disconnected from the power supply before changing adaptors.
WARNING! Avoid inflating objects above the recommended pressure. This may lead to damage and/or injuries.
Turning ON/OFF the 12V Air Compressor
Note:
To achieve optimal performance when operating your 12V Air Compressor, your vehicle’s engine should be running. This also
ensures that your cars battery does not discharge while using your 12V Air Compressor.
Caution: Identify correct terminal connections before attempting to power the 12V Air Compressor.
1. Connect the Battery Terminal Clamps (1 & 2) to your vehicle’s battery. Ensure that the BLACK Negative (-) Battery Terminal
Clamp (2) is connect to the negative terminal first (Fig 9).
2. Followed by connecting the RED Positive (+) Battery Terminal Clamp (1) to the positive terminal of your vehicle’s battery (Fig 9).
3. Press the ON/OFF Switch (3) into the “I” to turn the unit ON (Fig 10).
4. Press the ON/OFF Switch (3) into the “0” position to turn the unit OFF (Fig 10).
(Fig 5) (Fig 6) (Fig 7) (Fig 8)
(Fig 9) (Fig 10)