2
Tool Trolley
K7927
7 Drawer Deep
675mm (26”)
Assembly Instructions
Maintenance
Removing the Drawers
• Fully extend the empty drawer.
• Push up the right grey release lever while
pushing down the left grey release lever.
• Pull the drawer outward until it is
released from the drawer slide.
Re-Inserting The Drawers
• Extend the drawer slides.
• Insert the brackets on each side of the
drawer into the slots on the slides, being
careful that they are properly positioned.
• Once properly inserted, completely close
the drawer to set the slides in their
proper positions.
• Periodically tighten all hardware
• Periodically lubricate castors
• Lubricate the slides twice a year
• Lubricate the lock with graphite annually
• Use a damp Microfibre cloth to clean
all surfaces
Push up the
right grey release lever
Pull down the
left grey release lever
Handle Installing
• Position the trolley side handle behind the
holes on the trolley.
• Attach with (4) bolts, and tighten with
a 5mm Hex Key.
Castor Installing (If applicable)
• Be sure the drawers are locked and lay
the trolley on its side.
• Secure castors to the unit using the
13mm bolts provided.
• Tighten with a 13mm Spanner.
• Repeat this process for the castors on
the opposite of the trolley.
• Return the trolley to its upright position.
Caution: Do not over tighten the bolts.
Caution: Both locking castors must be
fitted to front of trolley.
1
2
1
2
1a
1b
2
1
