Kinco 2M1180N, User Manual

Page: 31 / 36

2M1180N/2M2280N Stepper Motor Driver
15
Chapter 4 FAQ
4.1Indications of Driver Indicators
N series stepper motor drivers are equipped with complete protection circuits to protect their
safety to the greatest extent possible. In addition, the rich indications of indicators help the
user to learn the working status of the driver in time.
Indications of Indicators:
Alarm
Indicator
Motor Status
Power Run Error Chop
Internal power failure Off Off Off Off The motor power supply
disconnects and the motor shaft
releases
Single-chip
microcomputer
resetting
On On On On The motor power supply
disconnects and the motor shaft
releases
Hardware error On Off On On The motor power supply
disconnects and the motor shaft
releases
Motor
phase-to-phase error On Off On Blink
quickly The motor power supply
disconnects and the motor shaft
releases
Over-current alarm On Off Blink
quickly Off The motor power supply
disconnects and the motor shaft
releases
Over-voltage alarm On Off Blink
quickly
Blink
quickly
The motor power supply
disconnects and the motor shaft
releases
Overheat alarm On Off Blink
slowly
Off The motor power supply
disconnects and the motor shaft
releases
Under-voltage alarm On Off On Off The motor power supply
disconnects and the motor shaft
releases
DIP switch error On Blink
slowly On Off The motor power supply
disconnects and the motor shaft
releases
Motor cable not
connected On Off On Blink
slowly The motor power supply
disconnects and the motor shaft
releases
Normal running On On Off Off The motor runs normally
Test running On Blink
slowly Off Off The motor runs normally
Braking On On Off On The motor runs normally