INSTALLATION
INSTALLING AND REMOVING DRILL/DRIVER BIT
1. keyless Chuck 2. Close 3. Open
To install the driver bit/drill bit:
Turn the chuck counterclockwise to open the
chuck. Place the driver bit/drill bit in the chuck as far as it will go. Turn the sleeve
clockwise to tighten the chuck.
To remove the driver bit/drill bit:
Turn the chuck counterclockwise to open the
chuck. Remove the driver bit/drill bit from the chuck.
INSTALLING HOOK
1. Gloove 2. Hook 3. Screw
CAUTION:
Always be sure that the tool is switched off and the battery cartridge is
removed before carrying out any work on the tool.