1
Step
2
Step
3
Step
4
Step
Go into configuration mode (see page 5). The folder number displayed
corresponds to the last configuration folder used.
Select the folder “
300
” and validate with
.
Select the sub-folder “
309
” and validate with
.
The cursor
>
returns to the sub-folders line.
• press twice
to return to reading mode.
• press once
to return to another folder selection.
• with
and
keys, choose another sub-folder from the folder 300.
dbu
o
s
M
618
With
and
keys, enter the value in seconds of the time-delay
required (from
00
to
60
). Validate with
.
Once the purge is finished, time-delay is a time period before the transmitter returns to measurement
mode and before the analogue outputs are reactivated.
9. Other functions
12.d.4 - Time-delay
10. Error codes
Problem
:
• Interchangeable Measuring Sensor (SPI element)
not connected
Solution
:
• Connect the probe / SPI (see SPI notice)
Page 24
CPE 300 transmitter configuration via remote control / Modbus
