Kimex 163-3235, User Manual

Page: 21 / 43

English - 20 -
router does not have a problem, check the internet
connection of your modem.
Connection is Slow
See the instruction book of your wireless modem to
get information on the internal service area, connection
speed, signal quality and other settings. You need to
have a high speed connection for your modem.
Distruption during playback or slow
reactions
You could try the following in such a case:
Keep at least three meters distance from microwave
ovens, mobile telephones, bluetooth devices or any
other WLAN compatible devices. Try changing the active
channel on the WLAN router.
Internet Connection Not Available
If the MAC address (a unique identifier number) of
your PC or modem has been permanently registered,
it is possible that your Display might not connect to
the internet. In such a case, the MAC address is
authenticated each time when you connect to the
internet. This is a precaution against unauthorized
access. Since your Display has its own MAC address,
your internet service provider cannot validate the MAC
address of your Display. For this reason, your Display
cannot connect to the internet. Contact your internet
service provider and request information on how to
connect a different device, such as your Display, to
the internet.
It is also possible that the connection may not be
available due to a firewall problem. If you think
this causes your problem, contact your internet
service provider. A firewall might be the reason of a
connectivity problem.
Warning
Please make sure that below 3 parameters are not
configured this way at the same time; otherwise your
display may enter a reset loop on logo screen. In order
to get out of this loop, you should unplug the OPS unit
and change at least one of the 3 parameters.
1. Display: Menu > Settings > Signage > Power Up
Settings > Power Up Mode = STANDBY
2. Display: Menu > Settings > Signage > Power Up
Settings > Quick Standby = DISABLED
(*) If the ERP Regulations 2021 are applied (depends
on the model of the unit):
Menu > Settings > Signage
> Power Up Settings > Power Mode = ECO
3. OPS: BIOS Menu > Chipset > State After G3 >
S0 STATE
Apps
You can access the applications installed on your
Display from
Apps
menu. Highlight an app and press
OK to launch.
In order to open the Start url that is defined the in
Settings>Signage>Link Options menu highlight the
Custom App option and press OK .
Notes:
Possible application dependent problems may be caused by
the content service provider.
Third party internet services may change, be discontinued or
restricted at any time.
Internet Browser
To use the internet browser enter the Apps menu first.
Then launch the internet browser application which
has an orange coloured logo with earth symbol on it.
(*) The appearance of the internet browser logo may change
In the initial screen of the browser, the thumbnails of
the predefined (if any) links to web sites available will
be displayed as Speed Dial options along with the
Edit Speed Dial and the Add to Speed Dial options.
You can press the Internet button on the remote to open
the initial internet browser page. If the Open browser
initial page
URL in the
Settings>Signage>Link
Options menu is defined, the browser will open on
this page. Otherwise this button will not be functional.
To navigate the web browser, use the directional
buttons on the remote or a connected mouse. To see
the browser options bar, move the cursor to the top of
the page. History , Tabs and Bookmarks options and
the browser bar which contains previous/next buttons,
the refresh button, the adress/search bar, the Speed
Dial and the Vewd buttons are available.
To add a desired website to the Speed Dial list for
quick access, move the cursor to the top of the page.
The browser bar will appear. Highlight the Speed Dial
- button and press the OK button. Then select Add
to Speed Dial option and press the OK button. Fill in
the blanks for Name and Address , highlight OK and
press the OK button to add. Whilst you are on the site
you wish to add to the Speed Dial list, highlight the
Vewd button and press the OK button. Then highlight
Add to Speed Dial option in the submenu and press
the OK button again. Name and Address will be filled
automatically according to the site you are visiting.
Highlight OK and press the OK button to add.
You can also use the
Vewd
menu options to manage
the browser. Highlight the Vewd button and press
the OK button to see available page specific and
general options.
There are various ways to search or visit websites
using the web browser.