XSEDE
®
Height Adjust
2
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Customer Care.
Part 3111703,
-
Assembly Instructions
3.
Attach sidebars to crossbars with Phillips Flathead
1/4
-
20”
X
5/8”
screws. See Figure D
4.
Place adhesive bumpers on the crossbars. The bumpers
should be places as close to the fixing screws as possible.
The bumpers come in two thicknesses. The thicker, square
ones are used on the inner tube. See Figure E.
5.
Slide Power Supply Bracket over crossbar as shown in Fig-
ure F.
6.
Attach Base to a worksurface using supplied Panhead
#8X3/4
”
and flathead #10X2
-
3/8
”
wood screws. Route hand-
set Cable between the Crossbar and the surface prior to
attaching. The shorter screws goes in the sidebars. The
longer screws go into the crossbars. See Figure G.
IMPORTANT: supplied screws are designed to work with a
worksurface with a minimum thickness of
3/4”
Figure D–
Sidebar Attachment
Xsede Height Adjust 3 Column
T
-
Leg
Installation Continued
Figure E–
Spacing Bumpers
Figure G–
Worksurface Attachment
Figure F–
Power Supply Support
4 1/2
”
4 1/2
”
23
”
DEEP
-(1 1/16”)
29
”
DEEP
-(4 1/16”)
23
”
DEEP
-(1 1/16”)
29
”
DEEP
-(4 1/16”)
#8 X 5/8
”
Panhead Woodsc rews
#10 x 2 1/4
”
Flathead
