Kimball 22-832, User Manual

Page: 4 / 22

2.
Test Tool Specifications
•
DC voltage range : 0-65V in one tenth incriments
• Resistance range : 0-100KQ
• Frequency response of tone pass through OHz to lOKhz.
•
Circuit Breaker
• Rating current: 1-10 Amp
•
Testing Standard:
100% current : Hold > 1 hour
150% current: trip in one hour
200% current: trip in 3-30 seconds.
300% current: trip in 0.5-4.0 seconds.
2 . 1 C o m p u te r an d A i rb a g s Sa f et y
The tool LED and LCD pull no more than 1 milliamp of current,
therefore when using it as a test light or multimeter it is computer
and airbag safe. However, when you press the switch forward,
you are conducting full battery current to the tip of the probe.
To prevent power from going to the tip but still allow you to use
the tool as a multimeter. Connect the e x tra ground lead to the
tool and press the power switch forward until it trips the
circuit breaker. When you are away from computer components,
simple press the reset button and you are ready to power up again.
-2-