Casegoods Assembly Instructions
Transcend
™
Printed in U.S.A.
© 2007 Kimball Inter
national, Inc.
T 800.482.1818
F 812.482.8300
Page 1 of 1
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Service.
Part No. 1998791 Revision A-07
Suspended Overhead Storage
Tools Required
■
Drill
■
⁷⁄₃₂
" Drill Bit
■
#2 Phillips Screwdriver
Installation
1. A suspended overhead storage unit mounts between two
set-on storage units or between a set-on storage unit and
a vertical storage unit.
2. With main units set in place and level in all directions,
place the overhead storage unit between the adjoining
storage cabinets. Align the overhead unit with adjoining
units and fasten together using the ganging bolts provided,
4 bolts per side. (Figure A).
3. A suspended unit should not be connected to another
suspended unit! (Figure B).
Figure A
Figure B
Suspended
Overhead
Storage
Set-on
Storage
